|Place of Origin:||China|
|Brand Name:||Leisiure Auto|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||Nuetral Color Box|
|Payment Terms:||T/T, Western Union, Paypal|
|Name:||Driver Fatigue Monitoring System||Material:||ABS|
|Alarm Type:||Voice, Viberator||Algorithm:||PERCLOS|
|Application:||All Vechicles||Reflection Time:||2 Seconds|
mr688 driver fatigue monitor,
driver fatigue system
Driver fatigue monitor with signal output 45km/h start-up speed
Driver Fatigue Monitoring System to the market. The product, which is designed to alert a driver to situations where driver fatigue and other dangers are likely to occur, is already in use in the oil, mining and gas industry in Indonesia.
Driver Fatigue Monitoring System is designed to not only accurately predict and identify situations where drowsiness and fatigue may be setting into a driver, but also to alert those drivers so that they can pull over to the side of the road and take other necessary steps to insure their general safety and the safety of other drivers.
When the system is installed, a single camera is placed on the dashboard of the vehicle in question with the lens facing the driver’s face at all times. From the moment the ignition in the car fires, the camera is always on and is always monitoring the driver’s face for signs of fatigue. Because of this, it can recognize how a person’s face changes when fatigue begins to set in and will play an audible alert, helping to keep them attentive and focused on the road in front of them at all times.
I/O and RS232 output optional:
I/O output is only a high/low voltage output, you can get only the alarm signal,the connection is easy. The default setting is high resistance status under normal status, low voltage output when triggered.
RS232 output has alarm signal and picture output, thus you can get the driver's face picture in the center, it need to integrate to the GPS system via protocol.
Power input and output
|power consumption||100mA in 12V car, and 60mA in 24V car|
|I/O output||high resistance status under normal status, low voltage output when triggered|
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
7. Demension: 4.5*10.2cm
Contact Person: Cindy